Specifications

Model: VZ-1
Number Of Keys:61 Keys (5 Octaves) With Touch Response-Initial/After Touch
Polyphonic:16 Note Polyphonic
Sound Source:iPD (Interactive Phase Distortion) System
Modes:Normal/Combination/Operation Memory/Multi Channel
Programmer:Preset Voices;64
Internal Voices;64
ROM Card Voices;128
RAM Card Voices;64
Preset Operations;64 (When System Initialized)
Internal Operations;64
ROM Card Operations;128
RAM Card Operations;64
Compare/Recall;5
Modules:8 x (DCO + DCA), On/Off
Parameters:Int Line (Mix/Ring/Phase),
Ext Phase (On/Off),
Waveform;8,
De- Tune (Pitch Fix, Harmonic, Polarity, Oct, Note, Fine)
DCO Envelope (Step = 1-8, Rate = 0-99, Level =-63-+ 63, Sus, End),
Env Depth (Range=Wide/Narrow, Depth=0-63),
KF Level (Point=1-6, Key=Co-C9, Level=0-63),
Vel Level (Sensitivity = 0-31, Curve = 1-8),
Vibrato (Wave:4, Depth = 0-99, Rate = 0-99 , Delay = 0-99, Multi On/Off),
Octave (-2-+ 2),
DCA Envelope (Step = 1-8, Rate = 0-99, Level = 0-99, Sus, End),
Env Depth (Depth = 0-99),
KF Level (Point = 1-6, Key = C0-C9, Level=0-99),
Vel Level (Sensitivity=0-31, Curve=1-8),
Tremolo (Wave:4, Depth = 0-99, Rate = 0-99, Delay = 0-99, Multi On/Off),
Amp Sensitivity (0-7),
Total Level (0-99)
DCO/DCA KF Rate (Point = 1-6, Key = C0-C9, Rate = 0-99),
Vel Rate (Sensitivity = 0-31, Curve = 1-8, Pitch Env Step = Ena/Dis, Amp Env Step=Ena/Dis),
Voice Name (12 Characters),
Parameter Copy And Initialize
Effect:Portamento (Time=0-99, Mode=0/1),
Solo (On/Off),
Pitch Bend (Range = 0-48, Release = Ena/Dis),
After Touch/Definable Wheel 1,2/Foot VR (Sensitivity=0-99,-1--99, Vib Depth=On/Off, Vib Rate = On/Off, Pitch = +On/-On/Off, Portamento Time = On/Off, Tremolo Depth = On/Off, Tremolo Rate = On/Off, Amp Env Bias = On/Off),
Combination Level (0-99),
Combination Pitch (Polarity, Oct, Note, Fine)
Split Point (Point = C0-C9, Upper Sp = Do-C9, Middle Sp = C#0-B8, Lower Sp = C0-Bb8),
Sustain Pedal = Ena/Dis,
Vel Split(Range = 1-127),
Vel Inverse = On/Off,
Pos Crossfade (Effect = On/Off), Position = C0-C9),
Delay Trigger (Delay = 0-99,
Vib Inverse=On/Off,
Tremolo Inverse=On/Off,
Combination Copy And Initialize,
Operation Name (12 Characters),
Area Pitch (Polarity, Oct, Note, Fine)
Inputs/Outputs:Line Out (1.2 Mix)
Output Impedence: 0.1 KW
Output Voltage: 0.6V rms Max.

Headphones, Foot Volume, Sustain, Foot VR, Program Number, Midi In/Out/Thru

Total Control:Tune (A4 = 417.2-442-468.3hz)
Transpose (G-C-F#)
Memory Protect (Int=On/Off, Card=On/Off)
Save/Load (Card/Midi),
Midi Channel (Receive= 1-16, Send=1-16),
Midi Data (Prog No.=0-127, Exclusive=Ena/Dis, Control No.=12-31, Volume In=Ena/Dis)
Card Format,
Preset Call
Display:64 x 96 Dot Matrix (with Back Light)
Power Supply:100v, 120v, 220v, 240v Ac
Memory Back Up:Built-in Lithium Battery (Life: approx. 5 Years)
Power Consumption:16 W
Dimensions:1060(W) x 324(D) x 93(H) mm
(41.75"(W) x 12.75"(D) x 31.6875"(H))
Weight:12 Kg (26.5 lbs.)
Standard Accessories:AC Power Cord, ROM Card, Plug Cord Set, Dust Cover

*Design and specifications are subject to change without notice.

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A.

(Not applicable to other areas).

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a class b computing device in accordance with the specifications in subpart j of part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the federal communications commission helpful: "how to identify and resolve radio- TV interference problems". This booklet is available from the US Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.

WARNING:

CHANGING THE VOLTAGE SELECTOR MAY REQUIRE THE USE OF A DIFFERENT LINE CORD OR ATTACHMENT PLUG OR BOTH. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.